The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Universal 8.5mm Alloy Pole Non Ferrule

(No reviews yet) Write a Review
  • Universal 8.5mm Alloy Pole Non Ferrule


The Universal 8.5mm Alloy Pole Non Ferrule measures 8.5mm in diameter and 55cm in length. This Pole Section is made from toughened 7005 alloy and does not come with ferrule.

Usage: Ideal for repairing or replacing broken alloy poles. You may need to cut them to size with a junior hacksaw depending on the length that you require. To find the diameter of your pole you will need to measure the diameter of the end of your pole that does not have the ferrule attached.

Material: Alloy
Diameter: 8.5mm
Length: 55cm
Colour: Silver

How do I Assemble the New Pole? 
Disassemble the current pole assembly as follows: 
• Hook the elastic holding pole sections at the end nearest the broken section and pull out so knot can be undone (or if necessary cut off) 
• Release the elastic and pull back through pole sections to the broken section taking care to keep the pole sections in the correct order. 
• Remove damaged section.

Cut the new section to same length as damaged section using a junior hacksaw.

Reassemble poles as follows: 
• Replace broken section with new section 
• Using a length of wire fixed to the end of the elastic (e.g. using tape) feed the elastic through all the poles in the correct order and re-knot at end. 

View AllClose