The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Universal 11mm Alloy Pole Section with Ferrule

(No reviews yet) Write a Review
  • Universal 11mm Alloy Pole Section with Ferrule
£9.50

Description

Constructed from lightweight yet tough 7005 aluminium alloy which measures 11mm in diameter and 55cm in length, 60cm including the male ferrule. Ideal as a replacement if you have broken a pole section, you can easily replace the old section but you may need to cut them down to the required length with a junior hacksaw.

Usage: Ideal for repairing or replacing broken alloy poles. You may need to cut them to size with a junior hacksaw depending on the length that you require. To find the diameter of your pole you will need to measure the diameter of the end of your pole that does not have the ferrule attached.

Specifications
Brand:
Universal
Material: Alloy
Length: 60cm (including ferrule)
Colour: Silver

How do I Assemble the New Pole?
Disassemble the current pole assembly as follows:
• Hook the elastic holding pole sections at the end nearest the broken section and pull out so knot can be undone (or if necessary cut off).
• Release the elastic and pull back through pole sections to the broken section taking care to keep the pole sections in the correct order.
• Remove damaged section.

Cut the new section to same length as damaged section using a hacksaw.

Reassemble poles as follows:

• Replace broken section with new section.
• Using a length of wire fixed to the end of the elastic (e.g. using tape) feed the elastic through all the poles in the correct order and re-knot at end.

If you require further information on removing, replacing or repairing your old pole, please read our FAQ.

View AllClose