Constructed from lightweight yet tough 7005 aluminium alloy which measures 8.5mm in diameter and 60cm in length, 64cm including the male ferrule. Ideal as a replacement if you have broken a pole section, you can easily replace the old section but you may need to cut them down to the required length with a junior hacksaw.
Usage: To find the diameter of your pole you will need to measure the diameter of the end of your pole that does not have the ferrule attached.
Material: Tough 7005 aluminium alloy
Length: 64cm (including ferrule)
How do I Assemble the New Pole?
Disassemble the current pole assembly as follows:
• Hook the elastic holding pole sections at the end nearest the broken section and pull out so knot can be undone (or if necessary cut off).
• Release the elastic and pull back through pole sections to the broken section taking care to keep the pole sections in the correct order.
• Remove damaged section.
Cut the new section to same length as damaged section using a hacksaw.
Reassemble poles as follows:
• Replace broken section with new section.
• Using a length of wire fixed to the end of the elastic (e.g. using tape) feed the elastic through all the poles in the correct order and re-knot at end.
If you require further information on removing, replacing or repairing your old pole, please read our FAQ.
Customers Also Viewed