A replacement first pole which fits into the central hub, it is suitable for the Tourer tent and the Motordome Tourer awning. The top joint is molded onto the fibreglass pole for an easy replacement.
Replacing the First Pole
• To remove the pole, you will need to disconnect the pole from the aluminum second pole.
• Remove the lid from the bottom of the hub and support and protect the rest of the tent by placing something like a large roll of packing tape under the hub.
• Stand the first pole vertically and tap it sharply with a mallet to knock the pole out of the hub, when the pole releases twist and remove it.
• Place the new pole in position and pull it over to a vertical position keeping the hub flat and the new pole should click into position automatically.
Tent Model: Tourer & Motordome Tourer
Pole Diameter: 16mm
Length: 76cm (end to end)
The pole is perfect, your service was even better. Congratulations in helping me mend our awning which must be at least 10 years old. John
Superb service and email support. My well loved awning has a new found lease of life and I’m delighted with quality and ease of the whole process. I watched a video to show me how to change the pole and job done! Thank you.
IMPORTANT measure pole diameter and buy based on that. I measured wrong and a quick call to Tent - Spares meant my mistake was quickly resolved. The instructions for changing were absolutely spot on and it took less than 30 minutes to replace the broken pole and erect the awning. I will definitely use tent spares again in the future.