The Force 10 Argon 200 Pole Repair Pack consists of: 3 - 9.5mm x 60cm Alloy Poles fitted with a ferrule and 1 length of elastic.
Usage: Ideal as an emergency repair kit or to replace broken sections within a pole run. Replacement poles are supplied at a length of 68.5cm (Fibreglass) including the ferrule or 60cm (Alloy) including the ferrule, depending on which pole pack you are ordering, so you may need to cut them to size with a junior hacksaw.
How do I Assemble the New Pole?Hook the elastic holding pole sections at the end nearest the broken section and pull out so knot can be undone (or if necessary cut off)
Disassemble the current pole assembly as follows:
Release the elastic and pull back through pole sections to the broken section taking care to keep the pole sections in the correct order.
Remove damaged section.
Cut the new section to same length as damaged section using a junior hacksaw.
Reassemble poles as follows:
Replace broken section with new section
Using a length of wire fixed to the end of the elastic (e.g. using tape) feed the elastic through all the poles in the correct order and re-knot at end.