This Pole Pack consists of: 10 x 7.9mm Black Fibreglass Pole Sections which are 60cm long approx (including ferrule).
Usage: Ideal as an emergency repair kit or to build a complete new pole. You may need to cut them to size with a junior hacksaw depending on the length that you require. To find the diameter of your pole you will need to measure the diameter of the end of your pole that does not have the ferrule attached.
Dimensions: 7.9mm x 60cm (approx)
Quantity: Pack of 10
How do I Assemble the New Pole?
Disassemble the current pole assembly as follows:
• Hook the elastic holding pole sections at the end nearest the broken section and pull out so knot can be undone (or if necessary cut off).
• Release the elastic and pull back through pole sections to the broken section taking care to keep the pole sections in the correct order.
• Remove damaged section.
Cut the new section to same length as damaged section using a hacksaw.
Reassemble poles as follows:
• Replace broken section with new section.
• Using a length of wire fixed to the end of the elastic (e.g. using tape) feed the elastic through all the poles in the correct order and re-knot at end.