This replacement fibreglass pole section is tough and durable and more importantly, cheap and easy to replace. Supplied at a standard length of 68.5cm with a metal end ferrule on one end. Ideal for repairing or replacing broken fibreglass pole sections.
Usage: All replacement poles are supplied at 68.5cm (including ferrule) long so you may need to cut them to size with a junior hacksaw. To find the diameter of your pole you will need to measure the diameter of the end of your pole that does not have the ferrule attached.
Diameter: 13mm (12.7mm)
Length: 68.5cm (including ferrule)
Quantity: Sold Individually
How to Assemble the New Pole?
Disassemble the current pole assembly as follows:
• Hook the elastic holding pole sections at the end nearest the broken section and pull out so knot can be undone (or if necessary cut off)
• Release the elastic and pull back through pole sections to the broken section taking care to keep the pole sections in the correct order.
• Remove damaged section.
Cut the new section to same length as damaged section using a junior hacksaw.
Reassemble poles as follows:
• Replace broken section with new section
• Using a length of wire fixed to the end of the elastic (e.g. using tape) feed the elastic through all the poles in the correct order and re-knot at end.