For help and advice call 01455 239 999 or email firstname.lastname@example.org
This Durawrap Pole with Ferrule measures 13mm in diameter and 64cm in length (including ferrule). This pole section is made from grey durawrap and comes fitted with a metal end ferrule.
Usage: Ideal for repairing or replacing broken durawrap poles. All replacement poles are supplied at 64cm (including ferrule) long so you may need to cut them to size with a junior hacksaw. To find the diameter of your pole you will need to measure the diameter of the end of your pole that does not have the ferrule attached.
Length: 64cm (including ferrule)
FOR ALL TENT MAKES
WHY PAY OUT LOADS OF MONEY FOR NEW SETS OF POLES WHEN YOU CAN JUST REPLACE THE POLE SECTION THAT IS BROKEN?
How do I Assemble the New Pole?
Disassemble the current pole assembly as follows:
• Hook the elastic holding pole sections at the end nearest the broken section and pull out so knot can be undone (or if necessary cut off).
• Release the elastic and pull back through pole sections to the broken section taking care to keep the pole sections in the correct order.
• Remove damaged section.
Cut the new section to same length as damaged section using a junior hacksaw.
Reassemble poles as follows:
• Replace broken section with new section.
• Using a length of wire fixed to the end of the elastic (e.g. using tape) feed the elastic through all the poles in the correct order and re-knot at end.
If you require further information on removing, replacing or repairing your old pole, please read our FAQ.
Choose a currency below to display product prices in the selected currency.